Skip to content
English - Belgium
Contact us
  • There are no suggestions because the search field is empty.

JABRA - Connect Engage Headset/USB

Required settings

  • press and hold the 3 down arrows (under the clock) - you will see "advanced menu" with Headset below
  • You press the plus several times, until "desk phone" is visible
  • press the check mark - You will see "start configuration"
  • press the minus key if Yes is not selected
  • press the check mark to confirm Yes - You will now see the option "connect to desk phone"
  • press the plus key to select "Off".
  • press the back arrow several times until you are out of the menu, and the base says "update completed, restarting"
Recommended settings
  • press and hold the 3 down arrows (under the clock) - you will see "advanced menu" with Headset below
  • You press the plus until "base station" is visible
  • press the check mark
  • with the arrow down, you go through this menu item.
make sure the following settings are set as follows:
  • call recording: off
  • priority call: current call
  • telephone for outgoing calls: automatic
  • answer call when undocked: off
  • simultaneous ringing: off
Back from menu:
  • press the back arrow several times until you are out of the menu, and the base says "update completed, restarting"
Wait for the above to be listed.
  • press and hold the 3 down arrows (under the clock) - you will see "advanced menu" with Headset below
  • You press the plus until "usb phone" is visible
  • press the check mark - You will see "start configuration"
  • press the minus key if Yes is not selected

make sure the following settings are set as follows:
  • "phone line open when headset is not docked" ?: no/off